INFO-ATARI16 Digest Thu, 12 Oct 89 Volume 89 : Issue 514 Today's Topics: adding a 68881 Connecting non-Atari monitors to the ST laser printer vs. hard drive MiniTerm 9.31 New Encoding Protocal panarthea archive (was Re: Arc 5.21) PD wordprocs and VT52 emulator Portable Mac vs STACY PORTFOLIO is *not* vaporware... TOS 1.4 TOS 1.4 features??? (Was Re: Disk Speedup) ---------------------------------------------------------------------- Date: Thu, 12 Oct 89 19:35:02 BST From: Ian D Hawkins Subject: adding a 68881 Thanks for the replies to my posting asking for 68881 add-on info. The machine I intend adding the coprocessor to is a recent 1040STFM. It has two ROM chips, surface mounted GLUE and MMU chips and the 68000 is positioned below the keyboard space bar. It has been upgraded to 2M ram. I understood a German company (Lischa Datentechnik, Hochstrasse 22, 4173 Kerken 2) produced a board that was stuck ontop of the 68000, it sounded suitable, I wrote to them but no reply came. If any one knows about Lischa & the 68881 please elaborate. I tried to get a Third Coast CMI accelerator board, ordered it in june, they cashed the cheque, they still havent sent the board, despite having advertised its existance for months. I phoned them, they said 'ready in two weeks' .....four weeks ago. I am not happy with Third Coast's service. In reply to Wolfgang Hecht's enquiry about ST Fortrans, the only Fortran I am familiar with is by Prospero. It is well documented, has a good debuger, and produces code that runs 20KWhetstone/s double precision 50KWhetstones single precision (and 200KWhetstones for both precisions with the 68881). Both single and double precision use the IEEE floating point format. About the only gripe I have against it is the rather slow compile and link times and the slow editor screen manipulation (much improved with turbo ST 1.6). idh@uk.ac.umist.electrical-engineering.nabla Ian Hawkins (phone 061-200-4769) Elec Eng UMIST Manchester po box88 England ------------------------------ Date: 12 Oct 89 20:28:28 GMT From: grapevine!panarthea!koreth@sun.com (Steven Grimm) Subject: Connecting non-Atari monitors to the ST In article <375@loria.crin.fr> domen@loria.crin.fr (Eric Domenjoud) writes: >It seems that all bytes whose value was 0x0D were removed from >the executable file ARC.TTP, perhaps by a virus. Sorry, the virus is really CP/M text file format, which ends lines of text in a CR-LF (0x0D/0x0A). My bet is that you're on a UNIX system, and something on there is "smart" enough to convert those end-of-lines to UNIX end-of-lines, which are simply LF (0x0A). How are you decoding the program? --- " !" - Marcel Marceau Steven Grimm Moderator, comp.?sources,binaries?.atari.st sgrimm@sun.com ...!sun!sgrimm ------------------------------ Date: 12 Oct 89 16:02:23 GMT From: phyllis.math.binghamton.edu!dennis@bingvaxu.cc.binghamton.edu (dennis pixton) Subject: laser printer vs. hard drive I have a mega-4, atari laser printer, and external hard drive (Supra card). Apparently when I boot with the laser printer attached it must be turned on; otherwise I can't access the hard drive. If I turn the printer off after I boot I have trouble accessing both the hard drive and the floppy. It's a real pain to swap cables to bypass the laser printer. I talked to a dealer who said that this was "normal behavior". So: 1. Is there any danger to the laser printer if I leave it on while I'm using the mega? The system is usually on about 8 hours a day, seven days a week. 2. Is there any switch available which will allow me to use the machine with the laser printer still attached but turned off? 3. Is there anything else I can try? -- Dennis Pixton Department of Mathematical Sciences (607) 777-4239 SUNY-Binghamton dennis@math.binghamton.edu Binghamton, NY 13901 dpixton@bingvaxa.bitnet Dennis Pixton Department of Mathematical Sciences (607) 777-4239 SUNY-Binghamton dennis@math.binghamton.edu Binghamton, NY 13901 dpixton@bingvaxa.bitnet ------------------------------ Date: Fri, 13 Oct 1989 1:34:50 MET From: LarsErikOsterud Subject: MiniTerm 9.31 This is to all users of MiniTerm - All else may abort now ! A friend of mine got tired of editing MINITERM.INF in a text-editor and made a smart program called SETUP to configure MiniTerm.... This program is now posted to panarthea and will be available soon.... With this program it should be "piece of cake" to setup MiniTerm... Lars-Erik / ABK-BBS +47 2132659 / ____ ______ ________________________ Osterud / larserio@ifi.uio.no / /___ / The norwegian ST __________/ ______________________/ ____/ / Klubben, user association ------------------------------ Date: Thu, 12 Oct 89 10:06 CDT From: STIBOREK@vaxb.acs.unt.edu Subject: New Encoding Protocal In a letter on 9 Sep 89 20:21:16 GMT Antony A. Courtney of: agate!helios.ee.lbl.gov!lbl-csam.arpa!antony@ucbvax.Berkeley.EDU (Antony A. Courtney) Writes:... >Don't believe everything you read. There are any number of sights out >there on bitnet which have to pass through very old IBM hardware. This >old IBM mainframe hardware does NOT use ASCII, but rather an older >standard called EBCDIC. There are, however, plenty of EBCDIC<-->ASCII >converter programs. Unfortunately they do not always agree on which >characters are which. I have seen this happen enough times to know >that uuencoding does not work for absolutely EVERY sight on EVERY >network. Uuencoding just works on enough sights that nobody complains. >Especially since nobody wants to have to clean up after IBM. >If you are still stuck or want more information about this, there was a >solution found by a programmer (and friend of mine) for the Tandy color >computer which transferred files across just about any network you can >think of(they use a fileserver on an EBCDIC computer). If you like, >I can send you more information on who to talk to about getting a >protocol which will work for you. [ excuse the public message all ] To Antony: I would be very interested in such a protocol to send files, we have narrowed down the problem to a 'brain-dead' gate along the route. If such a protocol would go through this gateway then the problem would be solved. I tried to e-mail you directly but failed, if possible send me e-mail. __ ___ __ __ _ __ __ / / / / / / /-/ / / / | /_ /_/ and thanks... /_/ /_/ / /_ / / / / /_/ /_ / | =>|John STiborek|UNTvax.BitNet|STiborek.Vaxb.acs.UNT.Edu.ARPA|Outlander|<= ------------------------------ Date: 12 Oct 89 20:21:46 GMT From: att!occrsh!uokmax!kllove@ucbvax.Berkeley.EDU (Kenneth L Love) Subject: panarthea archive (was Re: Arc 5.21) In article <34517@grapevine.uucp> koreth@panarthea.ebay.sun.com (Steven Grimm) writes: >It's come to my attention that several people don't have Arc 5.21 and don't >know where to get it. It is available from the panarthea archive service. >If you've never used the service, send a mail message containing the word >"help" to archive-server@panarthea.ebay.sun.com for more information. >--- >" !" - Marcel Marceau >Steven Grimm Moderator, comp.?sources,binaries?.atari.st >sgrimm@sun.com ...!sun!sgrimm Does anyone have an address for the panarthea.ebay.sun.com archive? My site doesn't seem to have it listed in the hosts file. Kenneth Love ps. Anybody ever notice that ST & TOS stand for Star Trek and The Original Series, respectively? Was this a total coincidence or was Atari trying to get some Trekkers ?Trekkies, whatever!? to buy the ST? ------------------------------ Date: Thu, 12 Oct 1989 12:37 EDT From: Greg Csullog <01659%AECLCR.BITNET@Forsythe.Stanford.EDU> Subject: PD wordprocs and VT52 emulator 1. PD wordprocs The attitude that it is nuts to pay more than $100 for software is the reason why there is not the same level of quality in much of the STware as there is in Macware. As I said on the NET before, if you want good codes, with good support, you have to pay for it UNLESS you find individuals like Simon Poole (UNITERM author) who develop exceptional PD codes. Strange as it may be, lots of people want to make money selling software; if they cannot, be prepared for a machine that has a limited selection of good codes. 2. VT emulator Forget the EMULATOR.ACC and get Simon Poole's UNITERM. UNITERM is the best ST emulator for the price (free). IMHO, it's the best at any price (no flames please). ------------------------------ Date: 12 Oct 89 16:47:22 GMT From: matthews@umd5.umd.edu (Mike Matthews) Subject: Portable Mac vs STACY In article <462a4b3d.14a1f@force.UUCP> covertr@force.UUCP (Richard E. Covert) writes: >Ok, now weill I didn't go to the WAACE Atari fest last weekend, I heard that >the STacy on display at the show was the same old prototype that Atari has >been showing for months!! It wasn't even a production model. I personally have never heard of a Stacy4 with 4 megs of RAM and an internal hard drive, until I saw it at the Fest. There is some problem with the local editor and what terminal type it thinks I'm using, so some of the lines from your old message seem to have disap- peared. Your definition of Vaporware is... well, not what I would consider OK. The STacy isn't vaporware. It is unavailable. Vaporware means, to me, the product doesn't exist in any form. >P.S. so, where was the TT, 1040STe, CD ROMs, PC DITTO II?? Did Atari >have the TOS 1.4 EPROMs for sell at the show?? Did Atari, the company, >show anything NEW at the show?? The TT etc. were absent (I'm a little upset at that too). Atari wasn't there to sell anything (they seldom, if ever, SELL anything at a show, just demo stuff). The new stuff they showed, aside from the STacy4, was the Portfolio and a Megafile 60 (not very exciting, but it IS new). > >Nope. I thought not. Since you yourself said you werne't there, I wish you'd stop making statements that would require your presence to verify them. >I, for one, am just waiting for Jim Allen to develope his 68030 board for the >Mega ST. I hear that he might even add more memory to it. And maybe better >color graphics!! Heck, maybe Jim Allen (designer of that wonderful product >Turbo16!!) can do what Atari has failed to do: > Design a 68030 computer and market it!!! > I'd rather have a computer designed for an '030. The Mega is too closed an architecture to allow any good to come from putting an 030 in there (compared to a real 030 machine). >I heard that Jim Allen was at the WAACE show. Did anyone talk to Jim?? >Richard Covert If I didn't now better, I'd say someone else wastrying to type into this document. One question I wish you'd ask yourself is this: what good is all this complaining doing? Mike Matthews ------------------------------ Date: 12 Oct 89 22:40:04 GMT From: imagen!atari!towns@ucbvax.Berkeley.EDU (John Townsend) Subject: PORTFOLIO is *not* vaporware... in article <891011.18574418.070054@SFA.CP6>, Z4648252@SFAUSTIN.BITNET (Z4648252) says: > > > With all the usual talk of "Atari's blown it again, etc., ad nausem" > from many on this net, including myself, it might be refreshing to know > that product is arriving, at least in this little neck of the woods, this > IBM and Mac world that I live in. > At our university, I saw two Portfolios that just arrived. One was > at the bookstore labeled to go to the legal school and the other is going > to the sports department. > To top it off, if you call 1-800-443-8020, you will not only get a > nice lady answering with "Portfolio Hotline" but she will quickly tell > you where your quickest dealer is. To be frank, I was so flabbergasted > at the professionalism that I forgot to ask if I could have ordered a > Portfolio via the same number. > I did retain enough mental capabilities to ask if I could have some > material for the Portfolio. "Why yes. What is your address?" I actually > remembered my address. > Anyway, I think the door is beginning to open. > > Larry Rymal: |East Texas Atari 68NNNers| As for your question, yes! You can order Portfolio from the same line as you called for information or you can order it from any of the speciality dealers that are currently carrying the product. For your closest Portfolio dealer, call the toll free 800 number listed above. As for the service, thanks for the comments.. I will pass them along to the tired Portfolio Group (Boy are they busy!).. -- John Townsend ames!atari!towns Atari Corporation, Technical Support ------------------------------ Date: 12 Oct 89 22:44:27 GMT From: uucp@eddie.mit.edu (Jon Drukman) Subject: TOS 1.4 OK, I know everyone is going to be sick to their stomachs at seeing this question, so do us all a favor and reply by MAIL only. What new features does TOS 1.4 offer? I have the Mega ROMs in my souped-up 520ST (double sided drive and 1 meg memory expansion). How much does it cost and where would it be preferable to get it from? I got the Mega ROM upgrade from a dealer on six chips, which I popped in myself in 10 minutes. Basically, is it worthwhile doing this upgrade? +---------------------- Is there any ESCAPE from NOISE? ----------------------+ | | |\ | jsd@gaffa.mit.edu | "I like George Bush, but this `kinder, | | \|on |/rukman | jsd@umass.bitnet | gentler' crap is killing us." - D.Trump | +-----------------------------------------------------------------------------+ ------------------------------ Date: 12 Oct 89 17:42:52 GMT From: att!watmath!watcgl!electro!carlo@ucbvax.Berkeley.EDU (Carlo Sgro) Subject: TOS 1.4 features??? (Was Re: Disk Speedup) In article <1725@atari.UUCP> jansen@atari.UUCP (Mark O. Jansen) writes: >I'd recommend you get Rainbow TOS, for this and lots of other reasons. Well, what are those reasons?? I've seen a LOT of discussion about 1.4 but I still haven't seen a summary of its new features and how to use them. Is this asking too much (honest question!)? -- Carlo Sgro ... but does Bo know nuclear physics? watmath!watcgl!electro!carlo ------------------------------ End of INFO-ATARI16 Digest V89 Issue #514 *****************************************